Het Klasic Color is a painterly tinted dispersion wear-resistant paint which is recommended for living and commercial areas, children's rooms, dining rooms, corridors, offices, sales areas. Suitable for coating mineral, gypsum and remediation plasters, masonry, concrete panels and monoliths, plasterboard, gypsum fibreboard and fibreboard, paper wallpaper for this purpose, fibreglass wallpaper, etc.
Immediate application of tinted paint, excellent hiding power and spreadability, matt appearance, dry abrasion resistance, excellent vapour permeability, suitable for the coating of plastering of renovation systems.
New collection of 36 shades
immediate application of tinted paint
perfect workability
excellent hiding power and spreadability
matt appearance
dry abrasion resistance
excellent vapour permeability
also suitable for the coating of plaster remediation systems
How to use Het Klasic Color:
For interior coatings of walls and ceilings, lime, lime-cement, gypsum-lime and gypsum plasters, plasterboard, gypsum fiber and wood fiber boards, plasters with an acrylic binder, remedial plasters (meets the requirements of WTA CZ directive No. 2-9-04/D, tab. 4 limiting the use of covering layers on renovation plasters in terms of water vapor permeability), concrete panels and monoliths, paper wallpapers intended for this purpose, glass fiber wallpapers, etc. Also for application to substrates with a combination of e.g. mineral plasters and plasterboard. The product meets the requirements for coating surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor permeable surface that is resistant to standard room humidity and resistant to rubbing with a dry cloth.
The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can withstand a temperature of around 70 °C for a short time. The color is suitable for painting residential and commercial spaces, children's rooms, dining rooms, corridors, offices, sales areas, etc.
Het Klasic Color yield:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Applying Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-scale application - by spraying AIRLESS, HVLP. When applying by spraying, it is advisable to carry out tests on a specific device in advance.
Background:
Dry, cohesive, free of dirt and biological attack (mold, algae), unsalted, non-greasy, free of formwork oils, chemically stable, mature (pH ≤8.5; check can be done with a pH tester).
Application temperature:
The temperature of the material, the environment and the substrate must be between +5 and +30 °C during application and within 24 hours after application.
Application procedure:
Impregnation is done with paint diluted with a maximum of 0.3 liters of water per 1 kg of paint, or with the penetrating agent A-GRUND or AT-GRUND, in the case of plasterboard and other poorly absorbent or extremely smooth substrates with the UP-GRUND agent. If the substrate is a non-dusting, low-absorbing original paint film, it is not necessary to apply the primer. Old paint layers with insufficient adhesion are recommended to be scraped off. After the primer has dried, apply 1-2 topcoats with paint diluted with a maximum of 0.1 liters of water per 1kg of paint. For new or significantly different substrates, more topcoats are applied as needed.
Storage:
At +3 to +30 °C. Do not freeze, protect from direct sunlight. The product retains its useful properties in the original, unopened packaging at least until the date indicated on the packaging (EXP.), i.e. 48 months from the date of manufacture. The formation of a fine white veil on the inside of the packaging does not mean a reduction in the quality of the product.
Parameters of dried coating:
Gloss (ČSN EN 13300) matte
Resistance to dry abrasion - Clemen method (PN HET ZM 10-01) class 0 - 1 (high to very high)
Wet abrasion resistance (ČSN EN 13300) class 5 (not resistant)
Water vapor permeability (ČSN EN 1062-1) class V1 (high)
Thickness of the equivalent diffusion air layer sd (ČSN EN ISO 7783) approx. 0.03 m (at DFT 80 µm)
Adhesion to the substrate (ČSN 73 2577) ≥1.0 MPa
Content of hazardous substances
Contains 1,2-benzoisothiazolin-3-one, reaction mixture: 5-chloro-2-methylisothiazol-3 (2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [number ES 220-239-6] (3:1). May cause an allergic reaction.
If you are interested in a product, availability, as well as any other information you are interested in, you can find out by writing to the email meransury@gmail.com