It is used for final external and internal decorative surface treatment of objects. Grain size 1.5 and 2 mm.
Properties of silicone pasty plaster:
Silicone Grooved plaster 2 mm or 1.15 mm grit Increased protection against fungi and algae Weather resistant Stability of color shades, decorative appearance The winter label variant is for application in low temperatures of 5-12 °C
Preparation of substrate:
The substrate must be dry, firm, mature, free of dust and old coatings, e.g. stucco plaster or screed material of the insulation system. Apply the primer with BARLET PRIMER COAT FOR DECORATIVE PLASTER dyed to the shade of the plaster.
Recommended workflow:
Before applying the plaster, mix thoroughly but without whipping with a slow-moving mixer. You can adjust the consistency of the plaster with a small amount of clean water. Apply the plaster evenly and without interruption with a stainless steel trowel in a layer of the given grain size. After a short drying, adjust the surface of the plaster to the desired structure with a plastic trowel. At higher temperatures above 25 °C, the plaster dries faster, consider the correct creation of the structure and connection.
At lower temperatures of 5 to 12 °C and high humidity, use plaster marked Winter. Plaster cannot be applied at temperatures below 5 °C. Protect the applied plaster from rain while it dries. Cover the surrounding areas, dried plaster remains are difficult to remove. Use the product from one batch for complete surfaces, mix different batches together before use!
Consumption:
At a grain size of 2 mm consumption 2.3 - 2.5 kg/m² With a grain size of 1.5 mm consumption 2.1 - 2.3 kg/m²
If you are interested in a product, availability, as well as any other information you are interested in, you can find out by writing to the email meransury@gmail.com